Cancel
OK
9-16
PTZ Device
Cam ID Protocol
Baudrate
Parity Data
Stop
1
000
n Samsung
38400
None
8
1
2
001 Vic.
38400
None
8
1
3
002 Pan.
19200
None
8
1
4
003 Dia.
38400
Even
8
1
5
004 None
38400
None
8
1
6
005 None
38400
None
8
1
7
006 None
38400
None
8
1
8
007 None
38400
None
8
1
Half Duplex
Serial Mode :
Exit
Default
Brightness 050
Contrast
050
Color
050
Cancel
OK
Monitoring
Event Monitoring
Duration
Off
OSG Display
Date
On
Time
On
Title
On
Status
On
Spot Out Channel
CH1
Spot Out Event Monitor
Off
Monitor Out
Dual OUT
PB Channel Position
Right Down
Multi Channel Seq.
5sec
26
_ menu setup
PTZ Device
You can configure the PTZ device related
settings.
ID
ID for PTZ camera. It can have any number
among 0 to 255.
Protocol
Protocol that is supported by the PTZ device.
Available protocols are Samsung, Vic., Pan.,
AD, Phi., Ern., Pel-D, Pel-P, Vcl., Dia., Kal., and
Tech.
Baudrate
Available baud rates are 600, 1200, 2400,
4800, 9600, 19200, and 38400.
Parity
Select one of None, Even, and Odd.
Data
Select 7 or 8 for data bit.
Stop
Select 1 or 2 for stop bit.
Serial Mode
Select Half Duplex or Full Duplex for data
exchanging method.
In case of SHR-5082, only 8 channels are
displayed.
CAUTION
The above setting values must be the
same as the ones of the PTZ device.
For more details, please refer to the
user manual for the PTZ device.
Screen Setup
It is used to set the brightness, contrast, and
color for the camera image of each channel.
Place the cursor on the channel that you want to
set the values for brightness, contrast, and color.
When a channel is selected, its image appears
on the right. For selection, press the
ENTER
button. Use the
UP/DOWN
direction buttons to
change the value from 0 to 100.
When
Default
is selected, the value 50 is to be
assigned for each item of the selected channel.
In case of SHR-5082, only 8 channels are
displayed.
MONITORING
You can configure the monitoring-related
settings.
Event Monitoring
You can select any of Off, 3sec, 5sec, 10sec,
20sec, 30sec, and Continuous.
- Off: Event monitoring does not work.
- 3sec, 5sec, 10sec, 20sec, and 30sec:
Sets the screen duration period in the Auto
Sequence (or auto sequence) mode.
- Continuous: The event monitoring screen
remains alive until you press the
ALARM
button.
SHR-5162_Eng.indb 26
2007-06-18 ｿﾀﾀ・11:48:22
