Samsung SHR-4081N/P User Manual Download

Page: 58 / 196

5-14

PTZ Device

●

PTZ device ID from 0 to 255

●

Protocol

A protocol supported by PTZ device

The following protocols are now being supported.

Samsung/ Vicon/ Panasonic/ AD/ Philips/ Erna/ PelcoD/ PelcoP/Vcltp/ Diamond/

Kalatel

●

Baudrate

Baudrate supported by PTZ device , 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400

●

Parity

Defines one among None, Even, and Odd.

●

Data

Defines either 7 or 8.

●

Stop

Defines either 1 or 2.

●

Serial Mode

Defines either Half Duplex or Full Duplex.

Caution

The above items shall be aligned with the PTZ device setup condition.
For the details, please refer to User’s Manual of the PTZ device manufacturer.

Summary of Contents for SHR-4081N/P





































































































































































































Search results

Summary of Contents for SHR-4081N/P

Reviews:

Related manuals for SHR-4081N/P

Brands by name

Popular brands

Samsung SHR-4081N/P, User Manual

Search results

Summary of Contents for SHR-4081N/P

Reviews:

Related manuals for SHR-4081N/P

Brands by name

Popular brands