Samsung SHR-4081N/P User Manual Download

Page: 178 / 196

11-12

●

Calendar Window

- The date when the video data was recorded in the current device is displayed in

red.

- Click the red colored date to display the video information in Timeline.

- A thick red box will be displayed in the current date.

: Moves to the previous month.

: Goes on to the next month.

●

Audio Volume Control

- If you play a video file with audio recorded in, you can control the autio volume or

select Mute.

- The audio volume can be controlled by 10 steps from 0 to +10.

●

Brightness / Contrast

- You can control the brightness and constrast of the file in play.

- The default is +5.

- The brightness and constrast can be controlled by 10 steps from 0 to +10.

- Press the button to return to the default.

Summary of Contents for SHR-4081N/P





































































































































































































Search results

Summary of Contents for SHR-4081N/P

Reviews:

Related manuals for SHR-4081N/P

Brands by name

Popular brands

Samsung SHR-4081N/P, User Manual

Search results

Summary of Contents for SHR-4081N/P

Reviews:

Related manuals for SHR-4081N/P

Brands by name

Popular brands