Samsung SHR-4081N/P User Manual Download

Page: 154 / 196

SHR-4081N/P USER’S MANUAL

10-47

Site Setup

- Click the [Site Setup] button for Site Setup.

- Site Setup sets up the information on DVR(SHR-4081N/P) or Site that you want to

contact by Smart Viewer.

- Smart Viewer allows you to contact DVR(SHR-4081N/P) or Site registered here.

User registered DVR(SHR-4081N/P) list will be displayed here.

This button adds a new DVR(SHR-4081N/P) or deletes or revises the
already-registered DVR(SHR-4081N/P).

User registered Site list will be displayed here.

This button adds a new site or deletes or revises the already-registered Site.

This button adds DVR(SHR-4081N/P) selected from DVR List to the Site
selected from Site List. But, if the selected DVR(SHR-4081N/P) is set to ADSL
Network, it can not be registered with the site.

Summary of Contents for SHR-4081N/P





































































































































































































Search results

Summary of Contents for SHR-4081N/P

Reviews:

Related manuals for SHR-4081N/P

Brands by name

Popular brands

Samsung SHR-4081N/P, User Manual

Search results

Summary of Contents for SHR-4081N/P

Reviews:

Related manuals for SHR-4081N/P

Brands by name

Popular brands