A
Adding a HUB
An M7 and a HUB may not pair successfully if the M7 and HUB are too far apart or are on
different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.
The additional HUB amplifies the signal and lets you pair the M7 to the closest HUB.
1
Set the HUB that is connected to the wireless router
to Pairing mode by pressing its
spK Add
button for 1
second.
2
Plug in the new HUB you are using as an extender,
and then press its
spK Add
button for 10 seconds.
3
The newly added HUB's LED indicators turn off and
on, and it switches to Repeater mode.
4
Once the connection between the two HUBs has been
established, the added HUB's (
) indicator stops
blinking.
notes
9
If your smart device is not connected to the wireless router
with a Wi-Fi connection, the M7 will not appear on the
Samsung Multiroom
app.
9
Place the HUB that is in Repeater mode in an appropriate
location between the M7 and the HUB that is connected to the wireless router.
9
You can set only one HUB to Repeater mode.
A
relocating the M7
When relocating your M7, refer to the below table.
Wireless router
HUB
If you want to connect your M7 to the
current wireless router.
If you want to connect your M7 to a
different wireless router.
Without a HUB
Turn off the M7, relocate it and then turn
it on.
Turn off the M7, relocate it, then establish
the new connection as described in the
installation instructions on pages 18
With a HUB
Connect a LAN cable between the HUB
and the new wireless router, turn on the
HUB, and then turn on the M7.
M7
HUB
Used as a
extender
47
4444
