Phonebook menu
60
Add entry
(Phonebook 1.2)
You can store phone numbers and the
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone’s memory, and each name can be
associated with up to five numbers.
1. Enter the number you want to save.
Notes
:
• If you make a mistake while entering a number,
correct it using the
C
key. For further details, see
page 28.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
the key. “P” is displayed to indicate that a
pause will be inserted at that point in the dialling.
2. When you are sure that the number is correct,
press the
Save
soft key.
3. Select the memory where the number is to be
stored, either
Phone
or
SIM
, and press the
Select
soft key.
Note
: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be entered again.
4. If you select
SIM
in step 3, go to step 5.
If you select
Phone
in step 3, choose a number
type using the Up or Down key and press the
Select
soft key.
5. Enter the associated name.
Phonebook menu
61
For information about how to enter characters,
see page 42.
6. When you are satisfied, press the
OK
soft key.
7. If you select
Phone
in step 3, go to step 8.
If you select
SIM
in step 3, enter the location
number and press the
OK
soft key.
8. If you want to change the entry, use the options.
for information about how to do it, see page 58.
If you want to return to idle mode, press the
soft key or the
key.
Storing a number in idle mode
As soon as you start to enter a number in idle
mode,
Save
appears above the left soft key to allow
you to store the number in Phonebook.
Continue the procedure from step 1 on page 60 to
store the number.
Speed-dial list
(Phonebook 1.3)
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
Setting up speed-dial entries
1. Press the Up or Down key to scroll to an empty
location and press the
Select
soft key.
2. When the
Edit number
option highlights, press
the
Select
soft key.