2
.42
Other Functions
With the DRPD feature active, ÔDRPDÕ appears in the display and the
previously set reception mode is ignored. If you turn DRPD off, the
machine returns to any previously set reception mode.
Notes:
¥ DRPD must be set up again if you re-assign your fax number, or connect the
machine to another telephone line.
¥ After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone, then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT.LINE jack.
¥
SEND FROM MEMORY
ÑIf you are annoyed that you have to wait
until documents in the feeder are sent out when you try to send or
reserve another fax, turn this feature on. This feature enables all
transmission documents are automatically scanned into memory before
transmission.
Press
1
to turn this feature on.
Press
2
to turn this feature off.
¥
LOCAL ID
ÑThis feature allows the machine to automatically print the
page number, and the date and time of the reception at the bottom of
each page of a received document.
Press
1
to turn this feature on.
Press
2
to turn this feature off.
¥
PRIORITY TERM
(SF-5800P Only) ÑWhen you want to print a PC
document while the machine prints a received fax on the recording paper,
you can interrupt the printing and print the PC document. Press the
Priority
button to enable the feature. The interrupted fax data will be
stored in memory. To disable, press the
Print Priority
button again.
You can set your machine to turn the feature off automatically if there is
no further data printed within 30 minutes or 8 hours after PC printing.
Press
1
to select 8 hours. The machine turns off automatically 8 hours
after PC printing is completed.
Press
2
to select 30 minutes. The machine turns off automacally 30
minutes after PC Printing is completed.
¥
CLOCK MODE
ÑThis feature is to select the time format.
Press
1
to select 12 hour format.
Press
2
to select 24 hour format.
¥
FLASH TIME
Press
1
to select 100ms.
Press
2
to select 280ms.
Press
3
to select 600ms.
Summary of Contents for SF-5800P
