manualshive.com logo in svg

Samsung SF-5800P, User'S Manual Setup And Operation

Share
Download
Samsung SF-5800P User'S Manual Setup And Operation Download Page 70

2

.37

Other Functions

2

Operation

Call Back Message 

This report is printed out automatically when you do not respond to a
remote operatorÕs Voice Request.

Power Failure Report 

This report is printed out automatically when data in memory was erased.
This report shows data (if any) erased by the power failure. 

Note:

The list you have set to print out automatically will not print out in case of
no paper, paper jam, or PC print.

TO PRINT LIST

1. Press 

Menu

. 

2. Press the desired list button on the one-touch keypad. 

On the one-touch keypad, press 

Journal

for Transmission or Reception

Journal, 

Help List

for Help List, 

TX Confirm

for Message Confirmation

Report, 

Schedule Job

for Schedule Information List, 

Phone Book

for

Telephone Numbers List, 

System List

for System Data List.

The selected list will be printed out.

Summary of Contents for SF-5800P




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands