manualshive.com logo in svg

Samsung SF-5800P, User'S Manual Setup And Operation

Share
Download
Samsung SF-5800P User'S Manual Setup And Operation Download Page 24

1

.15

Set Up Your Machine

1

Getting Started

¥ Load envelopes with the flap side facing away from you. The stamp

area is on the left side. The end of the envelope with the stamp area
enters the feeder last.

¥ Load letterhead paper with the design facing you. The top edge of

the sheet with the logo should enter the printer first.

LETTERHEAD

Notes: 

¥ Do not feed stamped envelopes. The stamp is shown for placement only.
¥ Never use envelopes with clasps, snaps, windows, coated linings, or self-stick

adhesives. These envelopes may severely damage the machine.

¥ Depending on the thickness of your envelopes, the multipurpose paper feeder

can hold up to 5 envelopes. If you experience envelope feeding problems, try
placing envelopes one at a time into the manual paper feeder.

4.  Adjust the paper guides to the width of the print material. 

Slide

the guides until they lightly touch the stack of print material. Do not
bend the print material.

Paper guide

Note: 

If you print a job from PC, make sure that you select the correct paper
size and feed source in your application before printing.

Summary of Contents for SF-5800P




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands