Samsung SDM-160 User Manual Download Page 36

Page: 36 / 42

Digital Multiplexer

6-2

3.Weight value (REC DUTY) record

- Used to record weight value (record frequency is more than the channel whose duty is low) for the impor-

tant channel.

- Perform the weight value record using the REC duty (OFF, 1~5) by channel set from the “REC DUTY” of the

“1.REC OUT SET” on the main menu.

- The channel whose duty is set to “OFF” is not recorded.

- Example)

CH1:1, CH2:2, CH3:1, CH4:3, CH5:OFF, CH6:1, CH7:1,

CH8:1, CH9:1, CH10:2, CH11:3, CH12:1, CH13:OFF, CH14:1, ….

4.ALARM weight value record

- Record in the weight value only for the channels that alarm/motion occurs.

- Record by inserting the channel that alarm/motion occurs between channels.

- The duty of channels operates as “1” when recording the alarm weight value except that the REC duty is set

to “OFF” (channel whose duty is “OFF” is skipped).

- Perform the alarm/motion weight value record even when alarm/motion occurs in the channels whose REC

duty is set to “OFF”.

- Example)

REC DUTY

CH1:1, CH2:2, CH3:1, CH4:3, CH5:OFF, CH6:1, CH7:1,

CH8:1, CH9:1, CH10:2, CH11:3, CH12:1, CH13:OFF, CH14:1, ….

Alarm occurring channel: CH1, CH9

Motion occurring channel: CH3, CH9

5.Reservation record

- Specific channel is used to record for a specific time.

- Use by setting the start and time of channel setting and reservation record in the “RESERVATION” of the

“1.REC OUT SET” on the setup menu.

- The channel whose duty is set to “OFF” is not recorded.

✴

Perform the alarm weight value record for the channel set to the reservation record if the alarm occurs for

the period of reservation record.

CH1 “A”

➞

CH3 “M”

➞

CH9 “M”

➞

CH9 “A”

➞

SDM160 12/10/01 11:06 AM Page 6-2

Summary of Contents for SDM-160











































Search results

Summary of Contents for SDM-160

Reviews:

Related manuals for SDM-160

Brands by name

Popular brands

Samsung SDM-160, User Manual

Search results

Summary of Contents for SDM-160

Reviews:

Related manuals for SDM-160

Brands by name

Popular brands