background image

Digital Multiplexer

6-1

ENGLISH

Chapter 6. Recording

1.Normal record mode

When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “NOR”.

(1) Frame record

- When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to FRAME.

- The image signal entered from the maximum 16 cameras is output in Frame and recorded on the VCR.

- The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to

more than 1.

(2) Field record

- When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “FIELD”.

- The image signal entered from the maximum 16 cameras is output in Field and recorded on the VCR.

- The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to

more than 1.

2. TIME LAPSE record mode 

- When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “TLV”.

- The image signal entered from the maximum 16 cameras is recorded on the VCR in response to the trigger

signal of VCR.

- The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more

than 1.

- The trigger out of VCR and the VTR terminal this unit must be connected.

- “NO TRIGGER” character is displayed on screen while operating the field record operation of the normal

mode if the trigger signal is not received for 10 seconds.

1/30sec(NTSC), 1/25(PAL)

1/60sec(NTSC), 1/50(PAL)

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

Trigger output from TIME LAPSE VCR

SDM160  12/10/01 11:06 AM  Page 6-1

Summary of Contents for SDM-160











































Reviews: