Digital Multiplexer
5-4
- The following is displayed if pressing the “ENTER” button with the blinking position placed at the “SPOT OUT...”:
¥
You can set the sequence time of SPOT output.
¥
The blinking indication moves if pressing “ ”, “ ” button.
¥
The setting value is changed if pressing “ ”, “ ” button.
CH1~CH16 : 0 to 30 seconds.
Alarm S/W TIME : 01 to 30 seconds.
¥
The changed setting value is stored if pressing the “SET” button and you can return to the “MON OUT SET” menu.
✴
The channel of LOSS or “ 0 ” of sequence time will be skipped in the SPOT output sequence.
✴
SPOT OUTPUT on alarm
When the alarm is activated, only the alarmed channel will be output.
On single alarm : output only the alarmed channel.
On multiple alarms : output alarmed channels in turn at intervals of set ALARM S/W TIME.
(Even the sequence time of the alarmed channel is set as “ 0 ” then will be SPOT output.)
- The following is displayed if pressing the “ENTENR” button with the blinking position placed at “SEQUENCE….”:
¥
Set the indication time (second) of each channel in the automatic conversion mode.
¥
The blinking indication moves if pressing “ ”, “ ” button.
¥
The setting value is changed if pressing “ ”, “ ” button.
CH1 ~ CH16 : 0 ~ 30
“0” is skipped irrespective of existence of channel loss in the automatic conversion mode.
¥
The changed setting value is stored if pressing the “SET” button and you can return to the “MON OUT SET” menu.
[SEQUENCE]
CH1 : 02
CH2 : 02
CH3 : 02
CH4 : 02
CH5 : 02
CH6 : 02
CH7 : 02
CH8 : 02
CH9 : 02
CH10: 02
CH11: 02
CH12: 02
CH13: 02
CH14: 02
CH15: 02
CH16: 02
→
→
→
→
→
→
→
→
[SPOT OUT]
CH1 : 02
CH2 : 00
CH3 : 00
CH4 : 00
CH5 : 00
CH6 : 00
CH7 : 00
CH8 : 00
CH9 : 00
CH10 : 00
CH11 : 00
CH12 : 00
CH13 : 00
CH14 : 00
CH15 : 00
CH16 : 00
ALARM S/W TIME : 02
SDM160 12/10/01 11:06 AM Page 5-4
