- The following is displayed if pressing the “ENTENR” button with the blinking position
placed at “SEQUENCE….”:
¥
Set the indication time (second) of each channel in the automatic conversion mode.
¥
The blinking indication moves if pressing “ ”, “ ” button.
¥
The setting value is changed if pressing “ ”, “ ” button.
CH1 ~ CH 9 : 0 ~ 30
“0” is skipped irrespective of existence of channel loss in the automatic conversion
mode.
¥
The changed setting value is stored if pressing the “SET” button and you can return to
the “MON OUT SET” menu.
- The following screen is displayed if pressing the “ENTER” button with the blinking
position placed at the “LOSS DETECT….”:
¥
Set whether LOSS DETECT by channel will be done.
¥
The blinking indication moves if pressing “ ”, “ ” button.
¥
The setting value is changed if pressing “ ”, “ ” button. : ON
↔
OFF
¥
The changed setting value is stored if pressing the “SET” button and you can return to
the “MON OUT SET” menu.
5-6
Digital Multiplexer
SDM-090(P)
[SEQUENCE]
CH1 : 02
CH2 : 02
CH3 : 02
CH4 : 02
CH5 : 02
CH6 : 02
CH7 : 02
CH8 : 02
CH9 : 02
[LOSS DETECT]
CH1 : ON
CH2 : ON
CH3 : ON
CH4 : ON
CH5 : ON
CH6 : ON
CH7 : ON
CH8 : ON
CH9 : ON
→
→
→
→
→
→
→
→
SDM-090(P)D 6/26/01 5:45 PM Page 5-6
Summary of Contents for SDM-090
