Samsung SDM-090, User Manual

Page: 33 / 69

When desiring to see in the division screen
The division screen may be seen in the live replay mode and triplex mode and
the division mode of 2, 4, 7, 9 exists as a screen select mode.
The only division mode of 2, 4, 9 is available in the triplex mode.
➢
Method to use
Press the “multi screen” button wants until reaching the desired division
indication mode.
➢
Channel resetting method
1) Press the “SET” button. In this case the SET LED turns on and the
BORDER LINE on the left upper of screen blinks.
2) Move the section whose border blinks to a desired position using the move
button.
3) Press the “CAMERA SELECT” button equivalent to the desired channel at
the position.
4) Repeat operation in 2), 3) until setting is completed.
5) Press the “SET” button after completing setting.
➢
The previously indicated division indication mode is returned if selecting the
division screen using the “MULTI SCREEN” button on the full screen.
➢
“MULTI SCREEN” button does not operate in the following cases:
- In setting division screen
- In setting of program mode
- In displaying ALARM LIST on screen
- During zoom operation
4-3
Digital Multiplexer
SDM-090(P)
SDM-090(P)D 6/26/01 5:45 PM Page 4-3