Samsung scx-4100 series Service Manual Download Page 71

Page: 71 / 111

7-6

Troubleshooting

Samsung Electronics

Service Manual

7.1.11 Ghost (3)

• Description

Ghost occurs at 57 mm intervals.

Digital Printer

57 mm

Check and Cause

Solution

1. Disassemble the fuser and remove any

contamination on the rollers. Clean any
contamination from between the
Thermistor and the Heat roller. (Caution:
Take care not to deform the rollers.)

Fuser contamination.

7.1.13 Stains on the Face of the Page

• Description

The background on the face of the printed page is stained.

Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer

Check and Cause

Solution

1. Toner leakage due to improperly sealed

toner cartridge.

2. If the transfer roller is contaminated,

stains on the face of page will occur.

1. Replace the toner cartridge.

2. If the transfer roller is contaminated, run

PC Cleaning Mode Print 2 or 3 times and
then perform Self-Test 2 or 3 times to
remove contamination.

7.3.12 Ghost (4)

• Description

A White ghost occurs in a black image printing at 35.5 mm intervals.

Digital Printer

35.5 mm

Check and Cause

Solution

1. Problem in the toner cartridge, replace the

toner cartridge and try to print out again.

2. Check the HVPS supply voltage. Clean all

HV terminals on the cartridge and on the
set. Replace the HVPS if the problem
persists.

1. The life of the developer may be expired.

2. Abnormal output from the HVPS.

(Run EDC mode – see sections 6.1.2)

Summary of Contents for scx-4100 series
















































































































Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands

Samsung scx-4100 series, Service Manual

Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands