117
S
Se
ettu
up
p
116
S
Se
ettu
up
p
Lock Code
(MENU 8-0-4)
This feature allows you to change your current lock
code to a new one. The lock code is preset to “0000”
at the factory.
Enter the current code, and enter a new code. Enter
it once again at the prompt.
Note
: Your phone does not allow viewing of the lock
code for security reasons. So, if you have
changed the lock code, be sure to write it
down or memorize it.
To store an emergency number:
1. Select a location by pressing the
or
key,
and press the
OK
key.
2. If there is a number already stored in the selected
location, press the
CLR
key to clear the number.
3. Enter a phone number and press the
OK
key to
save.
Each emergency number can be up to 12 digits
long.
To call an emergency number in the lock mode,
simply enter one of the stored numbers and press the
key.
NAM
(MENU 8-0-3)
NAM stands for numerical assignment module-
essentially your phone number. Your phone can have
two NAMs. This means that you can have two phone
numbers for using your phone and can quickly and
easily switch your service back and forth between
the two numbers.
When you change the NAM, the phone turns off by
itself and then back on, or reboot, and acquires
service using the new NAM setting.
