21
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
20
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor lets you know by
blinking the empty Battery Status icon (
).
You hear a warning tone and a message repeats at
regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
Switching the Phone On or Off
1. Open the folder, if necessary.
2. Press and hold the
key for more than one
second to switch the phone on.
The service light flashes and the power on/off
melody sounds. When the system locates services,
the idle screen appears on the display.
If the phone is out of the service area, the No
Service icon (
) appears on the display. In this
case, you cannot place and receive calls. You can
try again later when service is available.
Note
: You can change the display language in the
Language
menu (
OK-5
). See page xx.
3. When you wish to switch the phone off, press and
hold the
key for more than two seconds.
WARNING!
Do not switch the phone on when mobile phone use
is prohibited or when it may cause interference or
danger.
Note
: Do not touch the antenna on the phone
unnecessarily when the phone is switched on.
Contact with the antenna affects the call
quality and may cause the phone to operate
at a higher power level than otherwise
needed.
Your Phone’s Modes
Standby Mode
Standby is the most basic state of your phone. The
phone goes into Standby Mode soon after you turn it
on, or whenever you briefly press the
key.
When your phone is in Standby Mode, you will
typically see the current date and time. If you enter a
phone number, you can press the
key to dial it, or
press the key to save it in Phonebook.
Press the
key at any time to return to Standby
Mode. Be careful; if you are on a call when you press
the
key, your phone disconnects the call and
returns to Standby Mode.
