Samsung SCD33, SCD34, SCD39 Owner'S Instruction Book Download

Page: 74 / 112

ENGLISH

Playback

Connecting to a TV which has no Audio and Video input jacks

✤

You can connect your camcorder to a TV through a VCR.

1. Connect the camcorder and VCR with the Multi-AV cable.

■

The yellow plug : Video

■

The white plug : Audio(L)

■

The red plug : Audio(R) - STEREO only

2. Connect a TV to the VCR.
3. Set the power switch on the camcorder to PLAYER mode.
4. Turn on both the TV and VCR.

■

Set the input selector on the VCR to LINE.

■

Select the channel reserved for your VCR on the TV set.

5. Play the tape back.

Playback

✤

You can play the recorded tape in PLAYER mode.

1. Connect a power source and set the power switch to PLAYER mode.
2. Insert the tape you wish to play back.
3. Using the

(FF) and

(REW) buttons, find the first position

you wish to play back.

4. Press the

(PLAY/STILL) button.

■

The images you recorded will appear on the TV after a few seconds.

■

If a tape reaches its end while being played back, the tape will rewind automatically.

Note

■

The playback mode (SP/LP) is selected automatically.

ANTENNA

S-VIDEO

A/V OUT

VCR

CAMCORDER

VIDEO

AUDIO(L)

AUDIO(R)

00654B SCD30-SEA (60~107) 5/6/03 8:53 AM Page 70

Summary of Contents for SCD33, SCD34, SCD39

















































































































Search results

Summary of Contents for SCD33, SCD34, SCD39

Reviews:

Related manuals for SCD33, SCD34, SCD39

Brands by name

Popular brands

Samsung SCD33, SCD34, SCD39, Owner'S Instruction Book

Search results

Summary of Contents for SCD33, SCD34, SCD39

Reviews:

Related manuals for SCD33, SCD34, SCD39

Brands by name

Popular brands