Samsung SCD33, SCD34, SCD39 Owner'S Instruction Book Download

Page: 58 / 112

ENGLISH

Advanced Recording

●

TV DISPLAY

✤

The TV DISPLAY function works in CAM, PLAYER, M.REC and M.PLAY modes.

✤

You can select the output path of the OSD (On Screen Display).

■

OFF: The OSD appears in the LCD screen only.

■

ON: The OSD appears in the LCD screen, View Finder and TV.

■

Use the DISPLAY button located at the left side of the camcorder to turn ON/OFF all of the OSD displayed on the
LCD/View Finder/TV.

1. Set the camcorder to CAM, PLAYER, M.REC and M.PLAY mode.

2. Press the MENU button.

■

The menu list will appear.

3. Move the MENU SELECTOR to highlight VIEWER and push the MENU SELECTOR.

4. Select the TV DISPLAY mode in list, push the MENU SELECTOR.

■

The DISPLAY mode switches between ON/OFF with each push.

5. To exit, press the MENU button.

CAM MODE

VIEWER SET

LCD ADJUST
DATE / TIME
TV DISPLAY

CAM MODE

INITIAL

LCD ADJUST
DATE / TIME
TV DISPLAY

CAMERA
A/V
MEMORY
VIEWER

00654B SCD30-SEA (28~59) 5/6/03 8:52 AM Page 54

Summary of Contents for SCD33, SCD34, SCD39

















































































































Search results

Summary of Contents for SCD33, SCD34, SCD39

Reviews:

Related manuals for SCD33, SCD34, SCD39

Brands by name

Popular brands

Samsung SCD33, SCD34, SCD39, Owner'S Instruction Book

Search results

Summary of Contents for SCD33, SCD34, SCD39

Reviews:

Related manuals for SCD33, SCD34, SCD39

Brands by name

Popular brands