Samsung SCD180, Service Manual

Page: 18 / 145

Samsung Electronics 4-5
Alignment and Adjustment
4. Functions of each button on the Remote Control
Description
Button
START/STOP (Confirm)
STOP (Data Down)
PLAY (Data Up)
FF (Mode Up)
REW (Mode Down)
Stores changed value in the adjustment and auto adjustment mode.
Changes data in the adjustment state.
Changes mode.
Note: In service adjustment mode, button names are different from those in customer function control mode.
e.g.) "START/STOP" is the same as "Confirm".
5. How to set up the camera adjustment mode
1) Connect the power source
(battery/DC cable).
2) Open Housing from video
camera.
3) Set the "POWER(CAMERA/PLAY-
ER)" switch to "CAMERA" position.
4) The OSD appears.
STEP 1
Press and hold the "DISPLAY" button
on the remote control and "EDIT(+)"
button on the video camera at the
same time for more than 5 seconds.
STEP 2
Monitor OSD shows " ".
Then camera adjustment mode has
been activated successfully.
STEP 3
Note : "XX" indicates variable values.
In adjustment mode, the buttons of the remote control is as the followings.
CAMERA ADJ O C D
EPR : F F EVR : F F