Samsung SCD180 Service Manual Download Page 31

Page: 31 / 145

Samsung Electronics

4-18

Alignment and Adjustment

3. AUTO HALL

1) Camera mode & 3100˚ K gray scale chart
2) Connect a video output terminal to a TV.
3) Press the FF(Mode Up)/REW(Mode Down) but-

ton so that OSD shows "OCD XX XX".

4) Press the START/STOP (Confirm) button.
5) Then micom finds out max. Hall value with an

iris opened and min. Hall value with an iris
closed. Store max. and min. value of Hall in OAD
and OAC respectively.

6) The OSD shows “OK” after finishing the adjust-

ment.

4. AUTO IRIS LEVEL

1) Camera mode & 3100˚ K gray scale chart
2) Connect a video output terminal to a wave

form monitor and a TV.

3) Press the FF(Mode Up)/REW(Mode Down)

button so that OSD shows "OCE XX XX".

4) Press the START/STOP (Confirm) button.
5) Then micom finds out max. Hall value with an

iris opened and min. Hall value with an iris
closed. Store max. and min. value of in OBC,
OBD and OBA, OBB respectively.

6) The OSD shows “OK” after finishing the

adjustment.

95±5IRE

Summary of Contents for SCD180


















































































































































Search results

Summary of Contents for SCD180

Reviews:

Related manuals for SCD180

Brands by name

Popular brands

Samsung SCD180, Service Manual

Search results

Summary of Contents for SCD180

Reviews:

Related manuals for SCD180

Brands by name

Popular brands