Samsung SCD180, Service Manual

Page: 42 / 145

Samsung Electronics 4-29
Alignment and Adjustment
Samsung Electronics 4-29
4-4. CVF Adjustment
Notes : For CVF adjustment, use the buttons on the video camera and the remote control.
After each adjustment step is completed, OSD shows "OK".
EEPROM(ICV02) stores confirmed adjustment value of each adjustment step.
After finishing the adjustment, turn power off.
Note: In service adjustment mode, button names are different from those in customer function control
mode.
STEP 1
1) Connect the power source
(battery/DC cable).
2) Set the "CAMERA/VCR" switch to "CAM-
ERA" position and LCD is close.
3) Camera screen and OSD appears.
4) Open housing of the video camera and
remove tape.
STEP 2
1) Press and hold the "EDIT(+)" buttonon the
video camera and "SELF TIMER" button on
the remote control at the same time for
more than 5 seconds.
When monitor OSD shows as above screen, CVF
adjustment mode has been activated successfully.
Note : "XX" indicates variable values.
1. How to get into the CVF adjust mode.
2. Functions of each button on the Remote Control
Monitor screen
Remote Control Button Location
CVF
PLL
EPR:XX EVR:XX
01
Description
Button
START/STOP (Confirm)
FF (Mode Up)
REW (Mode Down)
PLAY (Data Up)
STOP (Data Down)
Stores changed value in the adjustment mode.
Shift adjustment address to left.
Shift adjustment address to right.
Down value.
Up value.