English_31
●
Camera Opera
ti
O
n
y
SENSITIVITY : Set the sensitivity to tampering detection.
y
ALARM OUT : Outputting of detection signals can be set.
`
OSD : Display signals on the screen.
`
RETURN : Return to the TAMPERING menu.
y
RETURN : Return to the VIDEO ANALYTICS menu.
M
`
In the following cases, the initially set tampering detection function can malfunction.
- In a monitoring environment with a simple background or an environment with low light level or at
night, the detection performance can deteriorate.
- Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
- If camera tampering is detected, after some time(five sec), stabilization will be done before
restarting. During stabilization, there is no detection.
-
MOTION : This product generates signals each time an object movement is
detected in the four
areas of the screen
so efficient monitoring
can be achieved.
y
DET. SIZE : Selects an object
size to detect on
the screen.
y
DET. AREA : Set the areas of motion detection.
`
SEL AREA : Select from four areas that users want.
`
MODE : Determine whether to
use the selected area.
`
SENSITIVITY : Set the
sensitivity of
the motion
detection.
When you
adjust the
higher level,
the more
sensitive.
`
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
`
RETURN : Return to the MOTION DET menu.
y
NON DET. AREA : Specify a detection exception area to mask.Select a
MOTION DET
▶
1.
DET. SIZE
2.
DET. AREA
3.
NON DET. AREA
4. INDICATOR
OFF
5.
ALARM OUT
6.
RETURN
MOTION DETECT AREA
▶
1.
SEL AREA
AREA
1
2.
MODE
ON
3.
SENSITIVITY
----
----
5
4.
TOP
--------
1
5.
BOTTOM
--------
100
6.
LEFT
--------
1
7.
RIGHT
--------
100
8.
RETURN
