English_27
●
Camera Opera
ti
O
n
edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Function Setup switch.
-
DISP ID : Display camera title on top left corner of the screen.
-
FONT COLOR : You can change the OSD font color. (White, Yellow, Green,
Red, Blue)
-
LANGUAGE : You can select the menu language according to your requirements.
-
RETURN : Return to the SPECIAL menu.
y
Comm aDJ (sCb-5003Ph) :
This function sets up the camera
communication status when
controlling the camera through an
external control device.
❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘COMM ADJ’.
2
Select a desired mode using the Function Setup switch.
-
PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T,
SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL,
VICON, PANASONIC, GE and AD)
-
CAM ID : Determines the camera's identification number (between 0 and 255).
-
BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps .
-
UART MODE : You can select NONE, EVEN or ODD for the parity bits.
-
RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
-
COAX : You can select whether to use COAX communication.
-
RETURN : Return to the SPECIAL menu.
y
Comm aDJ (sCb-5000Ph) :
-
COAX : You can select
whether to use COAX
communication.
-
RETURN : Return to the SPECIAL menu.
COMM SETUP
▶
1.
PROTOCOL
SAMSUNG-T
2.
CAM ID
------
1
3.
BAUD RATE
9600
4.
UART MODE
8-N-1
5.
RET PKT
ENABLE
6.
COAX
ON
7.
RETURN
COMM SETUP
▶
1. COAX
ON
2.
RETURN
