Samsung SC-DC163, Owner'S Instruction Book

Page: 93 / 128

4
Move OK Select MENU Exit
M.Cam Mode
►Memory
Photo Quality
File No.
►Super Fine
►Series
6
Move OK Select MENU Exit
Series
Reset
M.Cam Mode
►Memory
Photo Quality
File No.
ENGLISH
93
Digital Still Camera Mode
Setting the File Number (File No.)

File Number setting works only in M.Cam Mode .

page 26

File Numbers are given to images in the order they were recorded
when they are stored on the Memory Card.

File numbers may be set as follows:
- <Series> : When there are existing files, the new image will be
named as the next number in the sequence.
- <Reset> : When there are no files stored on the Memory Card,
the file numbering starts from 0001.
1. Set the [Mode] switch to [CARD] .
2. Set the [Power] switch to [ (Camera)] .
3. Press the [MENU] button.

The menu list will appear.
4. Move the [Joystick] up or down to select
<Memory> , then press the [Joystick(OK)] .
5. Move the [Joystick] up or down to select
<File No.> , then press the [Joystick(OK)] .
6. Move the [Joystick] up or down to select the
desired option ( Series or Reset ), then press
the [Joystick(OK)] .

The selected option is applied.
7. To exit, press the [MENU] button.
臺 灣
數位靜態相機模式
設定檔案編號（File No.）

檔案編號設定僅限在 M.Cam Mode 下操作。

第 26 頁
 將為影像提供檔案編號以便在儲存到記憶卡上時記錄。
 檔案編號可設定如下：
-
<Series> ：當存在現有檔案時，新影像將會按下一個數字順序
命名。
-
<Reset> ：當記憶卡中沒有已儲存的檔案時，檔案的編號將從
0001 開始。
1. 設定 [Mode] 開關為 [CARD] 。
2. 設定 [Power] 開關為 [ (Camera)] 。
3. 按下 [MENU] 按鈕。

選單清單將會顯示。
4. 向上或向下移動 [Joystick] 以選擇
<Memory> ，然後按 [Joystick(OK)] 。
5. 向上或向下移動 [Joystick] 以選擇
<File No.> ，然後按 [Joystick(OK)] 。
6. 向上或向下移動 [Joystick] 以選擇想要
的選項（ Series 或 Reset ），然後按下
[Joystick(OK)] 。
 所選的選項將會套用。
7. 若要退出請按 [MENU] 按鈕。