Samsung SC-DC163, Owner'S Instruction Book

Page: 25 / 128

Power Switch
ENGLISH
25
Preparation
Connecting a Power Source

There are two types of power source that can be connected to your
DVD Camcorder.
- The AC Power adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household
power source to use the DVD
Camcorder without having to
worry about the battery power.
You can keep the Battery Pack
attached; the battery power will
not be consumed.
1. Connect the AC Power
adapter (AA-E9 TYPE) to a
wall socket.
The plug and wall socket
type may differ according to
your resident country.
2. Open the LCD Screen and Jack Cover.
3. Connect the DC cable to the DC IN jack of the DVD Camcorder.
4. Set the DVD Camcorder to each mode by holding down the Green
Tab on the [Power] switch and turning it to [On] or [Off] .
臺 灣
準備工作
連接電源

有兩種電源類型可以連接 DVD 攝錄放影機。
- 交流電源適配器：用於室內拍攝。
- 電池組：用於戶外拍攝。
使用家中電源
使用家中電源為 DVD 攝錄放影
機供電，就不必常常擔心電池電
量的多寡。您可以讓電池組留在
設備中，電池電量將不會消
耗掉。
1. 將交流電源適配器（AA-E9
型）連接到牆上插座。
牆上插座和插頭類型會因不
同的國家而異。
2. 開啟 LCD 螢幕和插孔蓋。
3. 將直流電纜線連接到 DVD
攝錄放影機的直流電
插孔。
4. 按住 [Power] 開關的綠色標籤，並轉動為 [On] 或 [Off] 可將 DVD
攝錄放影機設定為各種模式。