Samsung SC-D103 Owner'S Instruction Manual Download

Page: 70 / 112

ENGLISH

Advanced Recording

✤

The NITE PIX function works in CAMERA/M.REC mode.

✤

The NITE PIX function enables you to record a subject in darkness.

1. Set the camcorder to CAMERA mode.

2. Slide the NITE PIX switch to ON.

■

(NITE PIX indicator) appears on the LCD monitor.

■

The infrared(invisible rays) light is turned on automatically.

3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.

Notes

■

The maximum recording distance using the infrared light is about 3 m (about 10 feet).

■

If you use the NITE PIX function in normal recording situations (ex. outdoors by day),
the recorded picture may be tinted green.

■

In the NITE PIX mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC.

■

If focusing is difficult with the auto focus mode when using the NITE PIX function, focus manually.

■

Do not cover the Infrared Light with the hand.

NITE PIX (0 lux recording)

NITE PIX

0 : 0 0 : 0 0

6 0 min

STBY

OFF

NITE PIX

POWER

00743R SCD103 SEA (60~107) 1/10/04 8:56 AM Page 66

Summary of Contents for SC-D103

















































































































Search results

Summary of Contents for SC-D103

Reviews:

Related manuals for SC-D103

Brands by name

Popular brands

Samsung SC-D103, Owner'S Instruction Manual

Search results

Summary of Contents for SC-D103

Reviews:

Related manuals for SC-D103

Brands by name

Popular brands