Samsung SC-D103 Owner'S Instruction Manual Download Page 28

Page: 28 / 112

ENGLISH

Preparation

Using the Lithium Ion Battery Pack

✤

The amount of continuous recording time available depends on
-

The type and capacity of the battery pack you are using.

- How often the Zoom function is used.

It is recommended that you have several batteries available.

Charging the Lithium Ion Battery Pack

1. Attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an AC cord and connect the AC cord to a

wall socket.

3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turn the power switch to off, and the charging indicator will start to flash,

showing that the battery is charging.

5. When the battery is fully charged, disconnect the battery pack and the AC Power adapter from the

camcorder.

■

Even with the power switched off, the battery pack will still discharge if it is left connected to the
camcorder.

Notes

■

The battery pack may be charged a little at the time of purchase.

■

To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged.

Blinking time

Charging rate

Once per second

Less than 50%

Twice per second

50% ~ 75%

Three times per second

75% ~ 90%

Blinking stops and stays on

90 ~ 100%

On for a second and

Error - Reset the battery pack and

off for a second

the DC cable

Power Switch

00743R SCD103 SEA (01~27) 1/10/04 8:54 AM Page 24

Summary of Contents for SC-D103

















































































































Search results

Summary of Contents for SC-D103

Reviews:

Related manuals for SC-D103

Brands by name

Popular brands

Samsung SC-D103, Owner'S Instruction Manual

Search results

Summary of Contents for SC-D103

Reviews:

Related manuals for SC-D103

Brands by name

Popular brands