Samsung SC-D103 Owner'S Instruction Manual Download

Page: 25 / 112

ENGLISH

Preparation

✤

The lithium battery maintains the clock function and preset contents of the memory; even if the battery pack or AC power
adapter is removed.

✤

The lithium battery for the camcorder lasts about 6 months under normal operation from the time of installation.

✤

When the lithium battery becomes weak or dead, the date/time indicator will display “- - - ” when you set the DATE/TIME
to ON.
When this occurs, replace the lithium battery with CR2025 type.

1. Open the Jack Cover.

2. Take out the lithium battery holder from the lithium battery compartment.

3. Position the Lithium battery in the Lithium battery holder, with the positive ( )

terminal face down.

4. Re-insert the Lithium battery holder into the lithium battery compartment until

you can hear a "CLICK".

Note

The lithium battery must be inserted in the correct direction.

Warning: Keep the LITHIUM BATTERY out of the reach of the children.

Should any battery be swallowed, consult a doctor immediately.

Lithium Battery Installation

00743R SCD103 SEA (01~27) 1/10/04 8:54 AM Page 21

Summary of Contents for SC-D103

















































































































Search results

Summary of Contents for SC-D103

Reviews:

Related manuals for SC-D103

Brands by name

Popular brands

Samsung SC-D103, Owner'S Instruction Manual

Search results

Summary of Contents for SC-D103

Reviews:

Related manuals for SC-D103

Brands by name

Popular brands