Samsung SBB-SS08EL1/EN User Manual Download

Page: 94 / 111

Supported music file formats

File Extension

Type

Codec

Comments

*.mp3

MPEG

MPEG1 Audio Layer 3

*.m4a, *.mpa, *.aac, *.3ga

MPEG4

AAC

*.flac

FLAC

The Seek (jump) function is not supported.
Supports up to 2 channel

Supported Video Formats

•

Video content will not play, or not play correctly, if there is an error in the content or the container.

•

Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.

•

If the Index Table is in error, the Seek (Jump) function is not supported.

•

You may experience file stuttering while playing a video through a network connection.

•

The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.

•

Some USB/digital camera devices may not be compatible with the player.

Video Decoder

Audio Decoder

Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
For all Video codecs except MVC, VP8, VP6:

•

Below 1280 x 720: 60 frame max

•

Above 1280 x 720: 30 frame max

GMC 2 over is not supported.
Supports only BD MVC Spec.

Supports up to WMA 10 Pro 5.1 channel.
WMA lossless audio is not supported.
QCELP, AMR NB/WB are not supported.
If Vorbis is only in Webm container, supports up to 2 channel.

Summary of Contents for SBB-SS08EL1/EN
















































































































Search results

Summary of Contents for SBB-SS08EL1/EN

Reviews:

Related manuals for SBB-SS08EL1/EN

Brands by name

Popular brands

Samsung SBB-SS08EL1/EN, User Manual

Search results

Summary of Contents for SBB-SS08EL1/EN

Reviews:

Related manuals for SBB-SS08EL1/EN

Brands by name

Popular brands