Samsung S24H850QF series User Manual Download Page 9

Page: 9 / 57

Preparations

Chapter 02

Parts

Control Panel

―

The color and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.

LEFT

Return

JOG Button

Function Key Guide

RIGHT

DOWN

PRESS(ENTER)

Power LED

Icons

Description

JOG Button

Multi directional button that helps navigate.

―

The JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.

Power LED

This LED is power status indicator and works as

•

Power On (Power button): Off

•

Power saving mode: Blinking

•

Power Off (Power button): On

―

The power Indicator operation can be swapped by changing in the
menu. (

System

Power LED On

) Actual models because of functional

variation maybe haven’t this function.

Function Key Guide

Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.

―

Function Key Guide may vary depending on the function or product
model. Please refer to the actual product.

Summary of Contents for S24H850QF series


























































Search results

Summary of Contents for S24H850QF series

Reviews:

Related manuals for S24H850QF series

Brands by name

Popular brands

Samsung S24H850QF series, User Manual

Search results

Summary of Contents for S24H850QF series

Reviews:

Related manuals for S24H850QF series

Brands by name

Popular brands