24
Tidying Up the Connected Cables (S24H650GD* / S27H650FD*)
1
2
3
4
4
4
Tilt the display, as shown in the figure.
Rotate the machine to the highest vertical
position.
Connect the corresponding cables.
Arrange the cables through the groove on the
COVER-REAR, and then attach the COVER-REAR
SUB. When you attach the COVER-REAR SUB,
please aim six ribs of the COVER-REAR SUB to
the bottom holes of the COVER-REAR at first.
5
6
7
Arrange each of the two cables through either
side of the COVER-STAND CABLE, as shown in the
figure.
Rotate the machine to the horizontal position.
Assembly is complete.
