5-12) DAMPER IN THE REFRIGERATOR
Part name
Damper
How To Do
Descriptive Picture
1. Place a flat screwdriver
under the light cover hooks
and remove it pusing in the
direction of the arrow.
2. Remove two screws at the
cover damper.
3. Take off sensor and lamp
wire connector located on
the upper liner.
4. Remove the damper from
the refrigerator.
Be careful not to scratch.
When diassembling,make
sure the unit turned off.
40
DISASSEMBLY AND REASSEMBLY
5-11) WATER FILTER
Part name
Water Filter
How To Do
Descriptive Picture
The water filter is located behind the
Deli Bin of the refrigerator. The
water filter filters water for the ice
maker and the water dispenser.
1. Remove the Deli Bin by holding
the handle, pulling it out, and
then lifting up the back side of the
Deli Bin bottom smoothly with the
other hand.
2. Turn the water filter 1/2 turn
counterclockwise and pull it
down.
3. To install the filter, align the
indication mark (unlock position)
and push it up while turning 1/2
turn clockwise until the lock
position is aligned. Do not over
tighten.
5-10) PLASTIC DRAWERS IN THE REFRIGERATOR
Part name
Plastic Drawers
in Refrigerator
How To Do
Descriptive Picture
Drawers are designed for storage of fruits,
vegetables, and deli items.
The drawers are located in the lower portion
of the refrigerator.
1. Pull out the drawer as far as it goes.
2. Tilt the drawer up and pull it out until it is
removed.
When diassembling,make
sure the unit turned off.
Caution
Summary of Contents for RS2530BSH
