19
OPERATING INSTRUCTIONS & INSTALLATION
1) CUBE/CRUSHED/ICE OFF SELECTION
1-1) Upon the initial Power On, when F-Room Temp is above (41°F/5°C), CUBE LED on the Display lights up
and the other LEDs remains OFF. But, when F-Room Temp is lower than (41°F/5°C), it restores the ice
selection before the POWER OFF and displays it on the panel.
1-2) It is selected in the order of CUBE
→
CRUSHED
→
ICE OFF repeatedly by ICE TYPE key.
1-3) When operating Ice Dispenser Lever with CUBE or ICE OFF selected, it sends out ice cubes.
1-4) When pressing Ice Dispenser Lever with CRUSHED selected, it sends out crushed ice.
1-5) When ICE OFF is selected, ICE-MAKER does not make ice.
Note) When taking out ice with ICE OFF selected, only ice lefted in the storing box is extracted.
2) FILTER RESET
2-1) When FILTER INDICATOR LED on the front Panel becomes orange or red, Filter should be changed.
2-2) - When FILTER RESET button is pressed for a certain period (3sec) after changing Filter, FILTER
INDICATOR LED becomes green with “ Ding Dong ” sound. (When FILTER RESET is pressed, water
count is reset to 0)
- When the filter is replaced,reset the indicator by pressing the FILTER RESET button for 3 second at the
same time.
2-3) After Filter reset, when 270 Gallon water is used (including water used in making ice), FILTER
INDICATOR LED becomes orange , and when 300 Gallon water is used, FILTER INDICATOR LED
becomes red.
2-4) When the water filter is not needed due to the use of purified water or other reasons, the Filter Indicator
can be turned off. When pressing the Filter Reset Button for 5 seconds continuously, the Filter Indicator will
be off with a "Ding Dong" sound. (At this time, when 3 sec has passed, the filter will be reset with a "Ding
Dong" sound and when 5 sec has passed, the Filter Indicator will be off.)
2-5) When the Freezer temperature is higher than 41 °F upon the initial power on, the Filter Indicator will be
turned on. And, when it is lower than 41 °F, it will display the previous setting (before the power off).
3-5) ICE DISPENSER & WATER DISPENSER
Summary of Contents for RS2530BSH
