36
5-1) FREEZER DOOR
DISASSEMBLY AND REASSEMBLY
Part name
Door Fre
How To Do
Descriptive Picture
Removing the Front Leg Cover
Unscrew three phillips screws from
the front leg cover.
Pull the front leg-cover down with
both hands and remove it by lifting
it up with the upper rib.
Then, disengage the lower hooks.
Be careful of injury.
Separating the Water Supply
Line from the Refrigerator
Remove the water tube by
pressing the coupler (
②
)
and pulling the water tube (
①
)
away.
Removing the Freezer Door
1) With the door closed, remove
the upper hinge cover (
①
)
along the arrow (
③)
using a
screwdriver, and then
disconnect the wires (
②
).
2) Remove hinge screws (
④
) and
ground screw (
⑤
) counter-
clockwise, and take off the
upper hinge (
⑥
) along the
arrow (
⑦
). Take care when
removing the door to ensure
that it does not fall on you.
3) Remove the door from the
lower hinge (
⑧
) by carefully
lifting the door (
⑨
).
Be careful not to pinch the water
tubing and the wire harness at the
bottom of the door.
①
①
⑥
④
⑤
②
③
⑦
⑨
⑧
②
• Lift the door straight up.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface.
NOTE
NOTE
Be careful not to cut the water
tube when separating it from the
coupler.
NOTE
When diassembling,make
sure the unit turned off.
Caution
Summary of Contents for RS2530BSH
