10
ENG
Installing the Display on the Wall Attachment Panel
Wall Mount Bracket
Mounting Kits
Plastic Hanger x 4
Screws x 4
How to Adjust Mounting Angle
1
Secure the PDP to the wall mount bracket.
(Please refer to the following instructions.)
2
Set the angle by pulling the upper end of the
PDP attached to bracket in the direction of the
arrow.
3
The angle can be adjusted from 0° to 20° by
±2°.
The wall mount bracket is delivered
separately. Please tighten the captive
screw in the direction of the arrow after
assembling the bracket.
☛
This wall mount bracket installation guide is for the WMN4230 model. This installation guide may be
different from the PDP User’s manual. Please refer to the proper installation guide for your product.
Installation Notes
◆
Do not install the PDP on any place other than vertical walls.
◆
To protect the performance of the PDP and prevent troubles, avoid the followings:
- Do not install next to smoke and fire detectors.
- Do not install in an area subjected to vibration or high voltage.
- Do not install near or around any heating apparatus.
◆
Use only recommended parts and components.
◆
Do not install the PDP vertically.
0108 D55B-BN68-00589A-00_ENG 1/8/04 4:03 PM Page 10
Summary of Contents for PPM 42H3
Page 44: ...44 Memo ENG...
Page 45: ...45 Memo ENG...
