ENGLISH-
30
Information codes
1
The information
code below
appears with a
voice guide
2
Turn off the
emergency switch
and check the
below instructions
and take
appropriate action
3
Information code
will disappear
when you turn on
the emergency
switch
Information codes
Checklist
The POWERbot is caught, stuck or trapped while
moving around.
f
Turn off the emergency switch and move the POWERbot to
another area.
Foreign matter caught in the brush.
f
Turn off the emergency switch and remove the foreign matter
from the brush.
Foreign matter caught in the left Driving wheel.
f
Turn off the emergency switch and remove the foreign matter
from the Driving wheel.
Foreign matter caught in the right Driving wheel.
f
Turn off the emergency switch and remove the foreign matter
from the Driving wheel.
Bumper sensor needs to be checked.
f
Turn off the emergency switch and turn it back on.
f
When information code does not disappear, check if there's any
small foreign matter between the bumper and the main body. If
there is, pull the bumper slightly and remove the foreign matter.
Foreign matter accumulated on the obstacle sensor.
f
Turn off the emergency switch and clean the front and rear
sensor with a soft cloth.
Foreign matter accumulated on the cliff sensor.
f
Turn off the emergency switch and clean the cliff sensor with a
soft cloth.
Main PCB needs to be checked.
f
Turn off and restart the product. If the same problem occurs
repeatedly, a service check is required.
1_VR7200_EN_DJ68-00827B-00_AA.indd 30
2019-03-19 오후 5:25:54
