Samsung PL-50D4H Owner'S Instructions Manual Download

Page: 10 / 112

Wall Installation Instructions

This wall mount bracket installation guide is for the following models: PL-50D4H

Do not install the PDP on any location other than a vertical wall.

To protect the performance of the PDP and prevent problems, avoid the following locations:

• Do not install next to smoke and fire detectors.
• Do not install in an area subjected to vibration or high voltage.
• Do not install near or around any heating apparatus.

Use only recommended parts and components.

Installation Notes

Insulation Holder :

4 EA

SCREW

: 4 EA SCREW

: 12 EA

1EA

2EA

LEFT :1EA

RIGHT :1EA

Parts (Wall attachment panel is sold separately. Check with your dealer)

Wall Mount Bracket

ASSY-HINGE

Support Bars

Screws

BN68-00714D-00_002~25 7/20/04 1:50 PM Page 10

Summary of Contents for PL-50D4H

















































































































Search results

Summary of Contents for PL-50D4H

Reviews:

Related manuals for PL-50D4H

Brands by name

Popular brands

Samsung PL-50D4H, Owner'S Instructions Manual

Search results

Summary of Contents for PL-50D4H

Reviews:

Related manuals for PL-50D4H

Brands by name

Popular brands