Samsung PH49F User Manual Download Page 33

Page: 33 / 87

Chapter 2. Device setup

AV connection

• Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

• You can connect a video device to the product using a cable.

‒

Connecting parts may differ in different products.

‒

Press the

SOURCE

button on the remote control to change the source.

Connection using an HDMI-DVI cable

The appearance may differ depending on the product.

• Audio will not be enabled if the product is connected to a video device using an

HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio
ports on the product and video device.

• After connecting a video device to the product with an HDMI-DVI cable, make sure to

configure the settings as shown below to enable the video and audio from the video

device.

‒

Sound

→ set

HDMI Sound

AV(HDMI)

‒

Picture

→ set each screen mode to

Video/Image

under

Picture Mode

‒

System

→

General

→ set

HDMI Hot Plug

• Supported resolutions include 1080p (50/60 Hz), 720p (50/60 Hz), 480p, and 576p.

HDMI1 or HDMI2

AUDIO IN

DVI / RGB / MAGICINFO IN

DMI

Summary of Contents for PH49F
























































































Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands

Samsung PH49F, User Manual

Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands