Samsung PH49F User Manual Download Page 72

Page: 72 / 87

Chapter 5. Menu

Support

Support ▼

2nd

3rd

Description

Software Update

The

Software Update

menu lets you upgrade your product software to the latest version.

• Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically

after completing the software upgrade.

• When you upgrade software, all video and audio settings you have made will return to their default settings. We

advise you to write down your settings so that you can easily reset them after the upgrade.

Update Now

Update the software to the latest version.

Auto update

This feature automatically updates the product when not in use.

Contact Samsung

View this information when your product does not work properly or when you want to upgrade the software.

You can find information regarding our call centres and how to download products and software.

•

Contact Samsung and find the product

Model Code

and

Software Version

Reset All

This option returns all the current settings for a display to the default factory settings.

Summary of Contents for PH49F
























































































Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands

Samsung PH49F, User Manual

Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands