Samsung PH49F User Manual Download Page 41

Page: 41 / 87

Chapter 4. Home screen

•

Playback priority: network BGM > local BGM > video file in the main frame selected

by the user

‒

Network BGM: Settings can be configured in step 1 when creating a server

schedule.

‒

Local BGM: BGM settings can be configured using the tools displayed after the

TOOLS

button is pressed during

Player

playback.

‒

User-selected main frame: Main frame settings can be configured in step 2 when

creating a server schedule.

Template files and LFD(.lfd) files

Restrictions

•

Ensure a distributed folder (content / schedules) exists in

Internal

USB

memory.

Playback restrictions

•

A maximum of two video (

Video

) files can be played.

•

For

Office

files (PPT and Word files) and

PDF

files, only one file type is supported at a

time.

• Multiple videos (Video) cannot be played on a single display of a video wall

simultaneously.

Sound output restrictions

• More than one sound output cannot be used.
•

Playback priority: network BGM > local BGM > video file in the main frame selected

by the user

Summary of Contents for PH49F
























































































Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands

Samsung PH49F, User Manual

Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands