Samsung PH49F User Manual Download Page 46

Page: 46 / 87

Chapter 4. Home screen

The

No cloning file found on the external storage device. Export this device's

settings to the external storage device?

message appears.

Select

Export

to export the settings.

When a duplicate file is found on the external storage device

Connect the external storage device, then run the

Clone Product

function.

The

Cloning file found. Please select an option.

message appears.

Select

Clone from External Storage Device

Clone to External Storage Device

‒

Clone from External Storage Device

: Copy settings saved on an external storage

device to the product.

‒

Clone to External Storage Device

: Copy settings on the product to an external

storage device.

After configuration is complete, the product is rebooted automatically.

ID Settings

HOME

→

ID Settings

→

Assign an ID to a set.

Device ID

Enter the ID number of the product connected to the input cable for input signal

reception. (Range: 0~224)

•

Press ▲/▼ to select a number, and press

• Enter the number you want using the number buttons on the remote control.

Device ID Auto Set

This feature automatically allots an ID number to a device connected via an RS232C
cable.
When multiple devices are connected, enable the feature on either the first or last
device.

PC Connection Cable

Select a method to connect to MDC to receive the MDC signal.

•

RS232C cable

Communicate with MDC via the RS232C-stereo cable.

•

RJ-45 (LAN)/Wi-Fi Network

Communicate with MDC via the RJ45 cable or Wi-Fi network.

Summary of Contents for PH49F
























































































Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands

Samsung PH49F, User Manual

Search results

Summary of Contents for PH49F

Reviews:

Related manuals for PH49F

Brands by name

Popular brands