7
EN
What to Do if You are in Doubt or Have a
Problem
If you have any of the problems listed below try the solutions given.
This is normal.
•
Condensation inside the oven
•
Air flow around the door and outer casing
•
Light reflection around the door and outer casing
•
Steam escaping from around the door or vents
The oven does not start when you press the
button.
•
Is the door completely closed?
The food is not cooked at all
•
Have you set the timer correctly and/or pressed the
button?
•
Is the door closed?
•
Have you overloaded the electric circuit and caused a fuse to blow or a
breaker to be triggered?
The food is either overcooked or undercooked
•
Was the appropriate cooking length set for the type of food?
•
Was an appropriate power level chosen?
Sparking and cracking occur inside the oven (arcing)
•
Have you used a dish with metal trimmings?
•
Have you left a fork or other metal utensil inside the oven?
•
Is aluminium foil too close to the inside walls?
The oven causes interference with radios or televisions
•
Slight interference may be observed on televisions or radios when the
oven is operating. This is normal.To solve this problem, install the oven
away from televisions, radios and aerials.
•
If interference is detected by the oven’s microprocessor, the display may
be reset. To solve this problem, disconnect the power plug and reconnect
it. Reset the time.
If the above guidelines do not enable you to solve the problem,
contact your local dealer or SAMSUNG after-sales service.
Choosing the Heating Element Position(Lower
Heater)
The heating element is used when Super grilling. It can be placed in
one of two positions:
•
Horizontal position for Super grilling or combined
micsuper grill cooking
•
Vertical position for microwave cooking.
When moving heating elements, make sure to use the equipment
designed to move heating element while wearing safety gloves
provided with the product, and see if temperature drops sufficiently
(at least 10 minutes after grill or combination cooking operation) after
operation.
DO NOT apply excessive force when moving heating elements.
Proper cooking result cannot be obtained if Lower Heater is carried
out using the super grill function from the vertical position. Therefore,
make sure to put this product on a level surface in time of grill or
combination-cooking using the super grill function.
To set the heating element
to the...
Then...
Lower Heater Horizontal
position (supper grill or
combined mic
super grill cooking)
Pull out in the oven until it
is horizontal (180 degrees)
Lower Heater Vertical
position (top grill or
combined mic top
grill cooking, microwave
cooking, instant reheat,
defrost)
Push back in the oven until
it is vertical (90 degrees)
wn_Z_ztTWZZ[WlluUGGwG^GG~ SGt GX[SGYWW_GG\aYZGwt
