6
EN
Installing Your Microwave oven
Place the oven on a flat level surface 85cm above the floor. The
surface should be strong enough to safety bear the weight of the oven.
If the supply cord is damaged, it must be replaced by a special
cord or assembly available from the manufacturer or its service
agent.
For your personal safety, plug the cable into a 3-pin, 240 Volt,
50Hz, AC earthed socket. If the power cable of this appliance is
damaged, it must be replaced by a special cable.
Do not install the microwave oven in hot or damp surroundings
like next to a traditional oven or radiator. The power supply
specifications of the oven must be respected and any extension
cable used must be of the same standard as the power cable
supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
Setting the Time
If you don’t want to setting the time, press the
Stop
(
) button before
starting your cooking.
If you want to change or reset the time setting when the cooking is
finished and in the
Stop
status, press and hold the
and
Up
(
)
buttons simultaneously for more than 2 seconds.
1.
When you install your oven, make sure there is adequate
ventilation for your oven by leaving at least 10 cm (4
inches) of space behind and, on the sides of the oven
and 20 cm (8 inches) of space above.
2.
Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3.
This microwave oven has to be positioned so that plug is
accessible.
20 cm
above
10 cm
behind
10 cm on
the side
85 cm of
the floor
1.
Plug your oven into a standard household socket.
Result:
The following indication is displayed :
(
will flash)
2.
Press the
Down
(
) and
Up
(
) buttons to set hour.
3.
Press the
button.
Result:
The following indication is displayed :
(
will flash)
4.
Press the
Down
(
) and
Up
(
) buttons to set minute.
5.
Press the
button.
Clock set is finished.
wn_Z_ztTWZZ[WlluUGGwG]GG~ SGt GX[SGYWW_GG\aYZGwt
