Samsung PE40C User Manual Download Page 76

Page: 76 / 306

3 Using MDC

Using MDC

MDC (Multiple Display Control) is an application that allows you to easily control multiple display

devices simultaneously using a PC.

3.1

Configuring Settings for Multi Control

[

]

System

Multi Control

ENTER

[

]

Assign an individual ID to your product.

3.1.1

Configuring settings for Multi Control



ID Setup

Assign an ID to a set. (Range: 0~99)

Press

to select a number, and press [



ID Input

Enter the ID number of the product connected to the input cable for input signal reception.

Enter the number you want using the number buttons on the remote control.



MDC Connection

Select a method to connect to MDC to receive the MDC signal.



RS232C MDC

Communicate with MDC via the RS232C-stereo cable.



RJ45 MDC

Communicate with MDC via the RJ45 cable.



DisplayPort Daisy Chain

To display the [DP IN] video input through the [DP OUT] output port, select a device connection

method from Single Stream Transport (SST) and Multi Stream Transport (MST).



Clone

: In this Single Stream Transport (SST) output mode, the same screen output is displayed

on two display devices connected.

Clone

is selected, the PC

recognizes the two displays as a single monitor.

Clone

mode is enabled if the input source is a digital input other than

DisplayPort

, such

DVI

HDMI

MagicInfo

, or PIM.



Expand

: In this Multi Stream Transport (MST) mode, a different screen output is displayed on

two display devices connected.

Expand

is selected, the PC

recognizes the two displays as separate monitors.

The mode functions only on a PC that supports DisplayPort 1.2 MST.

For Full HD resolution (1920x1080) displays, a maximum of four displays can be

connected.

Summary of Contents for PE40C



















































































































































































































































































































Search results

Summary of Contents for PE40C

Reviews:

Related manuals for PE40C

Brands by name

Popular brands

Samsung PE40C, User Manual

Search results

Summary of Contents for PE40C

Reviews:

Related manuals for PE40C

Brands by name

Popular brands