147
Network
7
7 Network
13
Repeat the entry process for each field in the
IP Address
.
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the
or
button to change the number one unit at a time.
14
When done entering the
IP Address
, press [
].
15
Press the
button to go to the
Subnet Mask
fields, and then press [
].
16
Repeat the same entry process for
Subnet Mask
,
Gateway
, and
DNS Server
.
17
When done, select
OK
at the bottom of the page, and then press [
]. The network connection
screen appears and the verification process starts. When the connection has been verified, the
“Internet is connected successfully.” message appears.
7.1.5
WPS(PBC)
How to set up using WPS(PBC)
If your router has a
WPS(PBC)
button, follow these steps.
1
Go to
Network Setting
screen.
2
Select
Start
, press [
], and then press [
] again.
3
Press the
WPS(PBC)
button on your router within 2 minutes. Your product automatically acquires all
the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
