176
System
8
8 System
Troubleshooting for
Problem
Possible Solution
does not work.
Check if the device is an device. The system
supports devices only.
Check if the device power cord is properly connected.
Check the device’s Video/Audio/HDMI cable
connections.
Check whether
(HDMI-CEC)
is set to
On
in the
setup menu.
Check whether the remote control is compatible.
doesn’t work in certain situations. (Searching channels,
operating
Plug & Play
(initial setup), etc.)
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
Check if the function of the Anynet device is set on.
I want to start .
Check if the device is properly connected to the product
and check if the
(HDMI-CEC)
is set to
On
in the
Setup menu.
Press the
TOOLS
button to display the menu and select
a menu you want.
I want to exit .
Select
View PC
in the menu.
Press the
SOURCE
button on the product remote control and
select a non- device.
The message “Connecting to
device...” appears on
the screen.
You cannot use the remote control when you are configuring
or switching to a view mode.
Use the remote control after the product has completed
configuration or has finished switching to .
