Samsung OfficeServ User Manual Download

Page: 85 / 100

Log Viewer Menus

The OfficeServ Operator allows the user to store the logs of both incoming and outgoing calls
in the database. The <Run> menu consists of submenus as shown below:

Category

Description

Statistics

Displays simple statistical data.

Total Log

Displays detailed information on all calls.

Inbound Calls Log

Displays detailed information on incoming calls.

Outbound Calls Log

Displays detailed information on outgoing calls.

Trunk Calls Log

Displays detailed information on trunk calls.

Station Calls Log

Displays detailed information on station calls.

DID Log

Displays detailed information on calls retrieved based on DID
number/name.

CID Log

Displays detailed information on calls with specific called parties.

Transferred
Destination Log

Displays detailed information on calls transferred to specific
numbers.

Columns of each log window are described as follows:

Column

Description

Incoming/Outgoing

Incoming calls are displayed as

Outgoing calls are displayed as

Name

Displays the names of the called parties.

Tel

Displays phone numbers.

Date

Displays call dates.

Duration

Displays call duration on a second basis.

State

Calling status is as follows:
- Ringback : When making a call to a station, the called party

does not answer the call.

- Ringing : When a call is connected to a station, the called party

does not answer the call.

- Connected : A call is connected.
- Busy : The called station is busy.

DID Tel

Displays DID numbers.

DID Name

Displays DID names.

Note Displays

notes.

Table of Contents

Home Page

Summary of Contents for OfficeServ





































































































Search results

Summary of Contents for OfficeServ

Reviews:

Related manuals for OfficeServ

Brands by name

Popular brands

Samsung OfficeServ, User Manual

Search results

Summary of Contents for OfficeServ

Reviews:

Related manuals for OfficeServ

Brands by name

Popular brands