OfficeServ 7400 Installation Manual
© SAMSUNG Electronics Co., Ltd.
7-9
Pin No.
1
2
3
4
5
6
7
8
Function
Tx+
Tx-
Rx+
- -
Rx-
- -
The use of LIM port as an Uplink required the use of a twisted LAN cable.
7.1.4.2 Mounting Gigabit module of Switching board
GLIMP, GSIM, GWIM boards provide Gigabit Interface, and by using the SFP (Small
Form-factor Pluggable) Connector, support all 1000BASE-TX/SX/LX. Therefore, it is
important to mount the correct specification of Gigabit Interface Module, and connect each
other with the same kind of cables.
y
1000BASE-TX SFP Module - UTP Cable
y
1000BASE-SX - MMF Optic Cable
y
1000BASE-SX - SMF Optic Cable
7.1.5 Connecting an Wireless LAN Access Point
Wireless LAN service offered by the OfficeServ 7400 system requires the following
equipment: 4WLI board:
y
WLI Board: A board mounted on the OfficeServ 7400 system for WBS24 connection
y
WBS24: Wireless LAN Access Point(AP)
y
WIP-5000M: Wireless LAN IP phone
Table 7.2 Specification for Wireless LAN Equipment Connection
Items
OfficeServ 7400 System
(Both of Basic Cabinet and Basic + Expansion Cabinet.s)
Numbers of 4WLI Boards
3
Max. Numbers of WBS24
12
Max. Numbers of Users
120
Numbers of Simultaneous Users
48
Installation and Usage of WBS 24 and WIP-5000M
For information on how to install and use WBS24 and WIP-5000M, refer to
‘OfficeServ Wireless LAN Service Manual’ and ‘WIP-5000M User Guide’.
RJ-45
포트
