Samsung OfficeServ 7030 General Description Manual Download Page 70 | Manualshive

Page: 70 / 100

background image

4.39

Account Code Display

Call Duration Timer

Call for Group Identification

Call Logs

Call Processing Information

Caller ID Information

Calling Party Name

Calling Party Number

Conference Information

Date and Time Display

Dial by Name

Dialed Number

Enhanced Station Programming

Identification of Recalls

Identification of Transfers

Message Waiting Caller Number

Outside Line Identification

Override Identification

Programmed Message Display

Soft Keys

Stopwatch Timer

Text Messaging

UCD Supervisor Displays

DISPLAY FEATURES

4.3 DISPLAY FEATURES DESCRIPTIONS

ACCOUNT CODE DISPLAY

Account codes are conveniently displayed for easy confirmation. If entered incorrectly, users may press the
ACCOUNT key again and reenter the account code.

CALL DURATION TIMER

The system can automatically time outside calls and show the duration in minutes and seconds. Station users
may manually time calls by pressing the TIMER button.

CALL FOR GROUP IDENTIFICATION

Calls ringing to a station group pilot number can be programmed in several ways to display various combi-
nations of the following information: Station Group Number, Name, Caller ID Name, Caller ID Number, DID
Name, DID Number, or specific combinations of the above. Consult your Service Technician for setup options
and operation. Processing outside calls through Samsung Voice Mail System is required to receive Call for
Group Number and Group Name display.

CALL LOGS

Display keyset users may view telephone numbers in incoming and outgoing call logs. With the press of a
button the entry can be cleared, dialed or the CID Name, Number and Date of a specific call can be reviewed.

CALL PROCESSING INFORMATION

During everyday call handling, the keyset display will provide information that is helpful and in some cases
invaluable. Displays such as [CALL FROM 203], [TRANSFER TO 202], [701: RINGING], [TRANSFER FM 203], [708
busy], [Camp on to 204], [Recall from 204], [Call for 501], [message from 204] and [FWD ALL to 204] keep users
informed of what is happening and where they are. In some conditions, the user is prompted to take action
and in other cases the user receives directory information.

CALLER ID INFORMATION

Caller ID information is dependent on the use of display keysets. The following list explains the displays that
are used with Caller ID.

«
...
68
69
70
71
72
...
»

Summary of Contents for OfficeServ 7030





































































































Reviews:

No comments

Related manuals for OfficeServ 7030

Brand: D-Link Pages: 67

Brand: Karel Pages: 56

Brand: Karel Pages: 55

Brand: Viking Pages: 2

Brand: Uniden Pages: 12

Brand: IBM Pages: 84

Brand: Uniden Pages: 48

Brand: Sagem Pages: 64

Brand: Radio Shack Pages: 28

Brand: Wheelock Pages: 6

Brand: PalmMicro Pages: 37

Brand: UCOM Pages: 24

Brand: Sony Ericsson Pages: 2

Brand: Geemarc Pages: 48

Brand: Motorola Pages: 76

Brand: Motorola Pages: 54

Brand: Motorola Pages: 86

Brand: Motorola Pages: 122

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands